Description：
1.Product features:
- The ultra-thin, subminiature
- The full voltage input (90 ~ 264 vac)
- Low ripple and low noise
- Output overload short circuit protection function
- High efficiency and power density
- Product design to meet the EMC and safety testing requirements
- Low power consumption, green environmental protection, no-load loss < 0.1 W
- Aging and
- 100% load test
- Meet the requirements of UL, CE,
2. Environmental conditions
- Technical indicators:Single bit
- Working temperature: – 20-60 +degree
- Storage temperature: + 80-40 -degree
- Relative humidity: 5-95.%
- The cooling way: Natural cooling
- The atmospheric pressure: 80-106Kpa
- The altitude :2000M or less
- vibration
- Vibration coefficient of 10 ~ 500 hz, 2 g10min. / 1 cycle, 60 min. Each along the X, Y, Z axes
3. The electrical characteristics
The input features (test) at room temperature.
- The technical requirements:Single bit
- The rated input voltage:100-100.VAc
- The input voltage range:90-90.VAc
- Maximum input current:0.2 or less a.
- Input surge current;10 or less a.
- Maximum input voltage:270 or less VAc
- Input soft start: 50 or less MS
- Efficiency of low input voltage: Vin = 110 vac, output with 69 or more %
- High input voltage: Vin = 220 vac, output with 70 or more %
- Long-term reliability:MTBF 100000 or more H.
- No load rated output voltage: + 5 + / – 0.1 VDc
- Full rated output voltage: + 5 + / – 0.2 VDc A
- short time maximum output current: P 1000 ma
- The maximum output current for a long time: P 600 ma
- Voltage regulation: + / – 0.2 %
- Load regulation: + / – 0.5 %
- The output ripple and noise: (mVp – p) 50 or less
- The rated input voltage and output load.With 20 MHZ bandwidth oscilloscope,
- Load and 10 uF and 0.1 uF capacitance test. The MV
- Switch machine overshoot
- (rated input voltage, output and 10% load) 5 or less % VO
- Output over-current protection
- Output the maximum load of 150-200%
- Output short circuit protection
- Directly to the output of the normal short circuit, short circuit automatically resume normal work after removal
4. Safety features:
- 4.1 the product design as to meet the requirements of UL, CE safety certification.
- 4.2 safety and electromagnetic compatibility
- The input design USES UL 0.5 A insurance;
- PCB board made of double-sided copper-clad boards material is 94 – where V0 fire rating level;
- Safety standards in accordance with UL1012 EN60950, UL60950
- Insulation voltage I/P – O/P: 2500 vac
- Insulation resistance I/P – O/P > 100 m Ohms / 500 VDC 25 degree 70% RH
- Conduction and radiation in line with the EN55011, EN55022 (CISPR22)
- Electrostatic discharge IEC/EN 61000-4-2 level 4 8 kv / 15 kv
- Radiofrequency radiation immunity IEC/EN 61000-4-3 can be found in the application
- 4.3 safety design temperature
- At normal temperature on our power capacitor, main converter so on surface temperature does not exceed 90 degree; the largest
- The shell surface maximum temperature does not exceed 60 degree;
Packege included：
- 1x HLK-PM01 Household Switch Supply Module
There are no reviews yet.