Showing all 5 results
Matek Systems Battery Eliminator Circuit MICRO BEC 1.5A 5V/12V-ADJ$3.39
The Matek micro BEC (battery eliminator circuit) takes an input voltage of 7 - 21 volts and steps it down to either 5 or 12 volts, rated up to 1.5amps. Instead of using a potentiometer to control the voltage, which requires a millimeter to set, the voltage output of this BEC is selected by a simple solder tab; by default it is set to output 5 volts, with the solder tabs connected it will output 12 volts.
Matek UBEC 4A/5-12V Duo Output Built-in Battery Monitor Aux RX FLIGHT Control$16.99
This device is a high-efficiency, switch-mode buck regulator with two output channels, works with 7~26Vdc input. One output channel is capable of supplying 0~4A/5V for your RX or Flight Controller.
Matek UBEC for HV servo, Gimbal & Camera Systems, 5A-12V/7.2V$11.99
Matek UBEC 5A-12V is a switch-mode DC-DC regulator, works with 7.2V~25.2V, and outputs a consistent safe power supply(7.2V or 12V) for your electric equipments. It allows you to use FPV equipment that only works with 12 Volts of power supply. it will power VTX, gimbals, cameras, LED lights,etc. It features a high efficiency switch mode design providing better heat dissipation when compared to linear voltage regulators.
Matek 4S Lipo to 12V Linear Voltage Regulator$2.99
Generally the input voltage of FPV camera is 7~13V, When 4S LiPo is mounted, the linear regulator can convert 14~17V to 12V, and power camera & 12V 1W LED without ripple & noise.
- 25*10mm PDB, 1g, Small & Light.
- Input: 4S LiPo, Output: 12V, Cont.300mA