1.3″ OLED display module with I2C (or SPI) interface (10K pull-up resistance already included in I2C bus), SH1106 driver chip, internal or external charge pump optional, elliptical fixed hole (fit M2 screw), we also left a 1.0 x 4 FFC socket footprint on board, It’s a well-established product and had been used in many situations.
1.3 inch OLED is a part of the “OLED Display“ series, with the following features:
- Display Resolution: 128 x 64;
- On board power-on auto reset circuit;
- Internal / External charge pump optional (for OLED panel power supply);
- I2C (2.54 x 4) or SPI (2.54 x 6) interface optional;
- 1.0 x 4 FFC footprint (I2C only);
- Default I2C address: 0x3C, for some MCU with 8-bit I2C register, the I2C address should be 0x78 (0x3C << 1).
There are no reviews yet.