In stock
Metal J-head DIRECT FEED Hot end for 1.75mm. Extruder. with Fan, Heater & Thermistor .02/.03/0.4/.05/.06/.08mm nozzle.
•For filament diameter: 1.75mm
•Nozzle size: Choose 0.2, 0.3, 0.4,0.5, 0.6, 0.8mm
$7.49
In stock
2 x Cartridge Heater 12V 40W For Prusa 3D Reprap Printer Extruder Hotend
These are popular items to build extruder hotends for reprap 3d printers or to replace burned ones
Technical Specs
Voltage: 12V
Nominal Power: 40 Watt
Barrel Diameter: 6mm
Barrel Length: 20mm
Wire Length :1meter
Package Contents:
2 x Cartridge Heaters 12V 40W with 1m wiring
| Weight | 0.27 lbs |
|---|---|
| Dimensions | 6 × 1 × 2 in |
| Nozzle- 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm |
You must be logged in to post a review.
Brand new and high quality:
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. (note that this board does not include A4988 stepper motor driver module) It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports.
Metal J-head DIRECT FEED Hot end for 1.75mm. Extruder. with Fan, Heater & Thermistor .02/.03/0.4/.05/.06/.08mm nozzle.
•For filament diameter: 1.75mm
•Nozzle size: Choose 0.2, 0.3, 0.4,0.5, 0.6, 0.8mm
RAMPS 1.4 RepRap 3D Printer Electronics Controller for Arduino Prusa i3 Mendel
The RAMPS 1.4 board to fits the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform with plenty room for expansion. A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
There are no reviews yet.