UNO R3 CH340G Board and 2.4 Inch TFT LCD Touch Screen Module For Arduino

Description

Arduino UNO R3 16AU CH340G Board

Main Changes from the old version:

1. Adding two rows of the holes for the pins, so it can be connected with normal Dupond lines.
2. Adding 3 rows of the holes for wiring.
3. ATmega16U2 is replaced by CH340G.
4. Plug and Play, the driver will be installed automatically. 
5. Select the board UNO inside the DIE.
6. Interface: Common Micro USB interface, can use the phone charging cable, easy to use

Description:

UNO R3 board is 100% compatible with original Arduino, now it has perfect quality and performance .
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language.
Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP).
The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
This is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip.
 This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

Note:

The TOSduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers.
We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However,
the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.
The small chip is ATmega16U2, the 28 pin DIP socket chip is ATmega328-pu.

Interaction:

This item has not built-in battery, so it can not be charged. With that USB cable connect to computer, you can use it. There is no need of power supply.

2.4 Inch TFT LCD Touch Screen Module:
Features:

2.4 inch LCD TFT display
Colorful, 18-bit 262,000 different shades
4-wire resistive touchscreen
240 x 320 resolution
Spfd5408 controller with built in video RAM buffer
8 bit digital interface, plus 4 control lines
Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the micro SD
5V compatible, use with 3.3V or 5V logic
Size: 71 x 52 x 7mm

Package included:

1 x UNO R3 ATmega328P Board with USB
1 x 2.4 Inch TFT LCD Touch Screen Module with touch pen