Description
This water Flow Switch is to Protect the Laser Tube. When the Water Pump is not Working, the Water Sensor will Detective, and Shut Down the Laser Machine. So the Laser Tube will not be broken.
It can be used together with a Water Pump, instead of a Chiller.
Features:
1. Lift:3.2m
2. Flow:3000L/H
3. usage with 40w/60w/80w laser tube.
4. the water sensor set should be connected to “WP” and “G” of laser power supply.
5. when water was blocked,the laser power will stop working.
6. Pipe Booster Pump Flow Switch Carries Out on-off Control Over Sensing Elements through a Water Flow Type Magnetic Control Device, Thus Achieving the Effects of Starting and Shutting Down Water Pumps.
7. This water Flow Switch is to Protect the Laser Tube. When the Water Pump is not Working, the Water Sensor will Detective, and Shut Down the Laser Machine. So the Laser Tube will not be broken.
- Stable, high temperature, low water pressure start, safe
- Detect whether the liquid flow line and traffic is to meet the requirements, at the same time by switching electrical contacts provide a signal output ON or OFF state.
- quipment system by detecting the presence of a signal or a control current to pass there through (flow switch electrical contacts pass, off state) on the switch to determine the working status of the piping system.
- It can be used together with a Water Pump.
- Lift:3.2m, Flow:3000L/H, for 40w/60w/80w laser tube.
Reviews
There are no reviews yet.