Arduino Boards, Battery chargers Drone/UAV, Voltage regulators

3S 13A 12V 18650 Li-ion Lipo Battery Charger Protection Board – HX-3S-D02

Availability:

Out of stock


Model: HX-3S-D02
Overcharge voltage range: 4.25-4.35v ± 0.05v
Over discharge voltage range: 2.3-3.0v ± 0.05v
Maximum operating current: 9A
Maximum instantaneous current: 10-13A

 

$3.69

Out of stock

13A 12V 18650 Li-ion Lipo Battery Charger Protection Board – HX-3S-D02

Model: HX-3S-D02
Overcharge voltage range: 4.25-4.35v ± 0.05v
Size: 53 * 16 * 4.0mm
Over discharge voltage range: 2.3-3.0v ± 0.05v
Maximum operating current: 9A
Operating temperature: -40 — +50 ℃
Maximum instantaneous current: 10-13A
Storage conditions: -40– +80 ℃
Quiescent current: less than 50uA Effective life: more than 30,000 hours
Internal resistance: less than 150mΩ
Short circuit protection: protection, delay self-recovery.

Note 1: strictly according to Figure wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B +), do not deliberately short circuit!
Note 2: connected to the line after the need to charge the first activation, will have output.
Note 3: When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop the fastest battery that group is poor battery.

For some of the poor basis of electronic customers to explain: Do not put a good battery and poor battery mixed with the use of three groups of battery capacity / resistance closer to the better! (2 good battery +1 a poor battery use effect = 3 poor battery use effect).

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “3S 13A 12V 18650 Li-ion Lipo Battery Charger Protection Board – HX-3S-D02”

There are no reviews yet.

SHOPPING CART

close