Tuya Single Phase 65A Din Rail WIFI Smart Energy Meter timer Power Consumption Monitor kWh Meter Wattmeter 110V 220V 50/60Hz
Feature:
- Remote control at any time from anywhere through the iOS/Android APP tuya
- Set Voltage,Current, by APP,
- Schedule ON/OFF
- Energy monitoring can calculate house device power consumption
- Rated Current: 65A Pulse Frequency: 1600imp/kWh
Note:
WIFI meter only supports 2.4GHz network, not support 5GHz network
1. General Description
DDS238-2 WIFI type multi-function smart energy meter is designed to measure single phase two wire AC active energy and variable parameter. The meter have WIFI communication, it can use APP for remote reading and control on/off. Its data communication rules obey the requirement of WIFI 802.11b/g/n. It is a long life meter with the advantage of high stability, high overload capability, low power loss, and small volume.
The meter is manufactured complying with international standard IEC62052-11 on “Electricity metering equipment (AC) General requirements test and test conditions” and IEC62053-21 on “Static meters for active energy (classes 1 and 2)”.
2.Specification and Technical Parameters
Specification
| Meter type | DDS238-2 WIFI |
| Rate frequency | 50 or 60 Hz |
| Rated current | 65A |
| Rate voltage | 120V / 220V / 230V /240V |
| Limits voltage range | 100~270V |
| kWh Accuracy | Class 1 |
| R.M.S accuracy | Class 0.5 |
| LCD display kWh | 999999.9 kWh |
| Starting current | 20mA (min measure ) |
| Voltage circuit | <2W/10VA |
| WIFI | 802.11b/g/n ,only support 2.4GHz network , not support 5GHz network |
| Operation temperature | -25~70℃ |
Basic Features
- Measuring positive & negative active energy with negative energy accumulated into positive energy,.
- The meter also displays real voltage, real current, real active power
- Pulse LED indicates working of meter, Pulse output with optical coupling isolation 18~27V 27mA .
- Measuring active energy without calibration under long term operation
- Display step by step with button
- Can use APP software for data reading and remoter control on/off.
- Timing control function, it can set value from APP
There are no reviews yet.