PWM 30A Solar Charge Controller 12V 24V LCD Display Dual USB Solar Panel Charge controller
Specifications:
- Rated Voltage: 12V 24V Auto
- Application: Solar System Controller
- AUTO DETECT – AGM, GEL, OPEN
- Current: 30A
Package:
- 1x Solar panels Battery Charge Controller
- With Timer and light sensor,it could work for solar light system.
- Only For off-Grid PV Solar System.
- For 10A 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
- For 10A 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
SAFETY INSTRUCTIONS
1Make sure your battery has enough voltage for the solar panel controller to recognize the battery type before the first installation.
2The battery cable should be as short as possible to minimize loss.
3The solar panel controller is only suitable for lead acid batteries: OPEN,AGM, GEL
it is not suited for nickel metal hydride, lithium ions or other batteries.
4The solar panel controller is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
FEATURES
1.Build-in industrial micro controller.
2.One-key setting,digital display,auto memory function.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
SYSTEM CONNECTION
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
deep cycle batteries, pulse width modulation, battery bank, load control pv array, voltage disconnect, solar array, solar power system, mppt charge controller, charge controllers regulate
There are no reviews yet.