Pulleys:
2 x 5mm bore, 7mm max belt width, designed for GT2 2mm Pitch belt
4 x set screws
2mm allen key
Belt:
2 Meters of GT2 Timing belt
2mm pitch
6mm width.
3D Printer Timing Belt pulley sets, FDM 3D Printer
3D Printer GT2 Timing Belt 2 meters, 2mm Pitch, 6mm Width. Pully 2 x 5mm bore, 7mm max belt width
Availability:
In stock
Pulleys:
2 x 5mm bore, 7mm max belt width, designed for GT2 2mm Pitch belt
4 x set screws
2mm allen key
Belt:
2 Meters of GT2 Timing belt
2mm pitch
6mm width.
$5.99
In stock
| Weight | 0.0625 lbs |
|---|---|
| Dimensions | 5 × 5 × 1 in |
Based on 0 reviews
Be the first to review “3D Printer GT2 Timing Belt 2 meters, 2mm Pitch, 6mm Width. Pully 2 x 5mm bore, 7mm max belt width”
You must be logged in to post a review.
Related products
- FDM 3D Printer, Hotends parts
2 x Cartridge Heater 12V 40W For Prusa 3D Reprap Printer Extruder Hotend
FDM 3D Printer, Hotends parts2 x Cartridge Heater 12V 40W For Prusa 3D Reprap Printer Extruder Hotend
Metal J-head DIRECT FEED Hot end for 1.75mm. Extruder. with Fan, Heater & Thermistor .02/.03/0.4/.05/.06/.08mm nozzle.
•For filament diameter: 1.75mm
•Nozzle size: Choose 0.2, 0.3, 0.4,0.5, 0.6, 0.8mmSKU: 324144 - FDM 3D Printer, Circuit boards and controllers, 3D Printer kits
3D Printer Controller Board Shield For Ramps 1.4 Reprap Prusa Mendel Arduino
-20%FDM 3D Printer, Circuit boards and controllers, 3D Printer kits3D Printer Controller Board Shield For Ramps 1.4 Reprap Prusa Mendel Arduino
RAMPS 1.4 RepRap 3D Printer Electronics Controller for Arduino Prusa i3 Mendel
The RAMPS 1.4 board to fits the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform with plenty room for expansion. A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
SKU: 468
There are no reviews yet.