LERDGE 3D Printer Parts Board Touch Screen FFC FPC Flexible Display Cable AWM 36pin

LERDGE 3D Printer Parts Board Touch Screen FFC FPC Flexible Display Cable AWM 36pin Length optional for Lerdge Board

FFC soft cable 0.5 pitch 36pin, the direction is of the same direction

1. P = bit = core = pin (number of copper)
2. Cable length optional. 20cm, 30cm, 50cm, 70cm and 100cm. If you need longer ones, please let us know.
3. Spacing: the distance between the two needle center. If uncertain, measure the bus width (unit: mm)
Spacing algorithm: bus width / (number of pins+ 1)
4. Direction (check the ends of the cable): A with the same direction (metal surface in the same side)

Test with Lerdge board. Use the board test with the 2 meters cable (without shielding tape), and with the cable winding the stepper motor. The touch screen display operation is normal, no interference phenomenon, the test passed.