Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display

CloudRay
Availability:

Only 1 left in stock


$389.99

Only 1 left in stock

Return period: 90 Days

Purchase this product now and earn 355 Points!

Frequently purchased together:

CloudRay 40W CO2 Laser Tube Metal Head 720mm Glass Pipe for Laser Engraver Cutter Machine. Upgraded CR Series

Only 2 left in stock

Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display

  • Ruida RDC6442S system is a new generation system for 4-Axis control of laser engraving and cutting.
  • Digital Laser Control Signals:(1) TTL level output, 50 mA, Drive Capability, (2) PWM frequency 2K-50K for adjustable, (3) PWM duty ratio is 1% ~ 99%, adjustable, (4) PWM value is up to 5.0 V
  • One-Way 24V Power Supply, >2A. Motor Control Signal: Common-anode Output, Drive Capability 20 mA. Motor control pulse frequency: Max.500KHZ
  • 10/100M Ethernet + USB 2.0 Control. Interpolation: Linear/circular arc/B spline, accuracy + / – 0.5 pulse
  • Output: 4-channel, photoelectric isolated OC gate output, the max. drive capability 500mA drive capability (with follow-current protection). Input: 4-channel, photoelectric isolated input, compatible with 5V/ 12V / 24V logic level.

Product Introduction

  • RDC6442G/6442S system is the lastest laser engraving & cutting control system developed by Ruida Technology, this control system has better stable hardware with antistatic, resistance to high pressure. Based on 3.5-inch colorfull screen human-machine operation sysytem, with better operation interface and stronger functions, exellent motion control functions, high-capacity file memory, with strong compatible 2-way independent adjustable laser power control interface, strong comopatible U disk drive program, multiple ways gerneral/dedicated IO control.

Specifications

  • 6: the sixth generation controller
  • 4: controller version
  • 4: 4-axis
  • 2: 3.5 inch colorful screen
  • G: standard
  • Application area: laser cutting, laser engraving, laser welding etc.
  • Power:+24V, >2A
  • Temperature: 0~50 ℃, humidity is not greater than 70%

Technical Parameters

  • 1.Digital laser control signals:
  • (1) TTL level output, 50 mA,drive capability(can set enable signal polarity in software)
  • (2) PWM frequency 2K-50K for adjustable
  • (3) PWM duty ratio is 1% ~ 99%, adjustable
  • (4) PWM value is up to 5.0 V
  • 2.Motor control signal:common-anode output, drive capability 20 mA
  •    Motor control pulse frequency: Max.500KHZ
  • 3.USB: Max. transmission rate 12M bps; The longest distance is 5 meters.
  • 4.Network:Max. transmission rate is100M; Max. transmission distance is 200M.
  • 5.Interpolation:Linear/circular arc/B spline, accuracy + / – 0.5 pulse
  • 6.Output: 4-channel, photoelectric isolated OC gate output, the max. drive capability 500mA drive capability
  • (with follow-current protection)
  • 7.Input:4-channel, photoelectric isolated input, compatible with 5V/ 12V / 24V logic level

Functions

  • The controller has better resistance to high voltage and antistatic ability
  • One-way 24V power supply(compatible with 36V, but not recommended)
  • Support all brands and capacities of U disks, quick and strong compatible copy ability
  • 256M large-capacity file nonvolatile storage onboard, no bottlenecks limit for file size
  •  Capable of self-checking defective track, can format memory, good in fault tolerance
  • 10/100M Ethernet + USB2.0 communication mode for optional
  • Multi-way general large-current IO, convenient for function extension
  • Display processing path, file preview
  • Display processing progress bar
  • Communication mode can be chosen automatically
  • The max. four-axis stepper/servo motor open-loop control
  • Two-way independent digital/analog interface, software can be adjusted respectively, convenient for double laser heads control; Dedicated RF laser control interface
  • Soft/hard limit coordinates protection for optional
  • Support linear/circular arc/B-spline interpolation function
  • Online update mainboard program, convenient for maintenance and functions customization.
  • Auto-feeding, up and down, rotating engraving,left-right pushing plate, etc.Support feeding line by line, slope engraving function
  • Support Power-off restart for engraving, work time preview (high accuracy to millisecond, the preview time is exact to the actual working time, the other vendor cannot realize)
  • Support machines backlash compensation function
  • Increase Z axis linkage function
  • System Power-on resetting or not resetting for optional
  • Support multiple positioning points logic
  • All manufacturer/user parameters can be backup and restored
  • Support double laser heads automatic layout and multiple virtual arrays automatic layout, leftover material funct

Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display

SKU: 30681 Category: Tags: ,
Brands

Customer reviews

5 stars 0 0 %
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

Reviews

There are no reviews yet.

Be the first to review “Ruida RDC6442S CO2 Laser Cutting Engraving DSP Controller System LCD Display”

Use one of the allowed file type: jpg,png.

    WooChatIcon 0