Step Up power modules

1200W 20A DC Converter Boost Car Step-up Power Supply Module 8-60V to 12-83V

Availability:

In stock


  • Input Voltage: DC10V to 60V; Output Voltage: 12V to 90V (adjustable, default is 19V);Max. Input Current: 30A(input voltage 10V to 30V) or 25A(input voltage 31V to 60V)
  • The power supply module uses double sendust magnets winded with 1.2mm copper wires
  • Support reverse input protection with MOS so there is no worry about wrong input wire and burn out power supply
  • Low voltage protection will protect module and battery against damage from over-discharge when use a storage battery as input
  • Thickened heatsink and intelligent temperature control cooling fan dissipate heat better

 

$17.99

In stock

Return period: 90 Days

Purchase this product now and earn 12 Points!
Add to Wishlist
Add to Wishlist

1200W 20A DC Converter Boost Car Step-up Power Supply Module 8-60V to 12-83V

Parameters:
Module Name: 1200W Boost Constant Current Module(Non-isolated)
Input voltage: DC10-60V (direct input 10-60V without jumper cap selection voltage)
Input current: 20A (MAX) exceeds 15A, please add fan cooling (add fan input current can reach 25A when the fan input voltage is 12-24V)
Static working current: 15mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
Output voltage: 12-83V continuously adjustable (default output is adjusted to 19V shipment, please adjust to other voltage values.) 12-83V fixed output (for bulk customers)
Output current: 18A MAX More than 10A, please strengthen the heat dissipation (related to the input and output voltage difference, the larger the differential pressure, the smaller the output current)
Constant current range: 0.5-18A (+/-0.3A)
Low battery protection: yes (9-50V adjustable)
Working temperature: -40~+85 degrees (enhance heat dissipation when the ambient temperature is too high)
Working frequency: 150KHz
Conversion efficiency: 92%-97% (efficiency and input and output voltage, current, pressure related)
Input overcurrent protection: Yes (input over 25A, automatic protection, power does not boost)
Short circuit protection: Yes (input 30A fuse) Double short circuit protection, safer to use.
Input reverse connection protection: Yes (150A power MOS tube anti-reverse. Can be reversed for a long time)
Wiring method: 4 3mm copper columns, terminal block (please use high current pure copper wire)
Module size: length 130mm width 52mm height 53mm
Output power: = input voltage * 20A, such as: input 12V * 20A = 240W The maximum power when inputting 12V is 240W
Input voltage *20A For example: input 24V * 20A = 480W, that is: the maximum power is 480W when inputting 24V

Package Included:
1 x1200W 20A DC Converter Boost Power Supply Module

 

SKU: 314746 Category: Step Up power modules
Weight.75 lbs
Dimensions6 × 4 × 3 in