Output Voltage: 7.2V@5A or 12V@5A (Selectable by the switch)
Output current: Continuous 5 Amps, burst 8 Amps.
Input: 7.2V~25.2V (2-6S Lipo battery)
Size: 60*29*12mm (L*W*H)， Weight: 30g
Input cable 15cm (Silicone), Output cable 32cm(Silicone)
Uses advanced switch mode DC-DC regulator IC.
Much higher efficiency (up to 92%) than the linear mode BEC.
With ultra-wide input voltage from 7.2V-25.2V.
Output short-circuit protection function.
The working status is shown by an LED, it lights when the UBEC works normally.
Dual output sockets with magnet ring
The input voltage should be 12.6V minimum, to ensure stable output 12V.
Dual sockets output the same voltage.
Pay attention to the input polarity. Reversed polarity will damage the UBEC.
Properly insulate and regularly inspect all connectors to eliminate the possibility of short circuit.