H-Type tail light with 8*WS2812B LEDs & Loud Buzzer. It provides dual control modes, can be controlled by Flight Controller firmware (Cleanflight, Betaflight, etc.) or Transmitter.
How to Use
- Connect Tail Light to 5V power source, such as BEC 5V.
- Press the button, scroll through the LED status(Constant light, Slow flash, Fast flash, Voilent flash).
- Hold the button 2s to enter the setting of LED colors & mode(Be Be Be), then press the button to set it within LED colors of TX mode (White, Red, Green, Blue, Yellow, Magenta, Cyan) & FC mode (all LED OFF).
- The LED color(TX mode) or FC mode will be saved if no action within 10 seconds(Be).
- If the LED is messy when setting FC mode to TX mode, pls move the DIN & re-energize it.
Brand name: Matek
Item name: LED Tail light with Buzzer board
Dual modes: FC control & TX control
TX mode: LED 7 colors (White, Red, Green, Blue, Yellow, Magenta, Cyan) LED 5 status (Constant light, Slow blink, Fast blink, Voilent blink)
Buzzer: Lost Plane Finder
FC mode: support Naze32, SPRacingF3, etc. with CleanFlight or Betaflight firmware
Input voltage range: 4.5~5.2V DC
Power of TX mode (5V IN ): 1W/0.2A~2W/0.4A Size & mounting: Pls check the Layout
1 X LED Tail light with Buzzer board