CubeCell module LoRa GPS ASR6502 with ultra low power for IOT LoRa/LoRaWAN node applications 433MHZ/868-915MHZ
CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC 4000 series MCU (ARM Cor-tex M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino, can run the LoRaWAN protocol stably, and can easily connect lithium batteries and solar panels.
HTCC-AM02 is a Module. Supports AT transparent transmission commands, can be directly integrated into the application circuit.
HTCC-AM02 is a part of the “CubeCell“ series, with the following features:
CE and FCC certification;
Based on ASR6502, this chip is already integrated the PSoC 4000 series MCU (ARM Cortex M0+ Core) and SX1262;
LoRaWAN 1.0.2 support;
Ultra low power design, 3.5uA in deep sleep;
1.27 stamp edge design for SMT;
Good impedance matching and long communication distance.
MCU: ASR6502 (48 MHz ARM Cortex M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip: ASR6502 (Internal assembled Semtech LoRa Transceiver SX1262)
LoRa Working Band: 868-915
LoRa Maximum Output Power: 21dB ± 1dB
Hardware resources: 1. UART x 2; SPI x 2; I2C x 2; SWD x 1; ADC x 3; COMP x 1; 2. 12 – bits ADC; 8 – channel DMA engine; 3. 14 x GPIO
FLASH: 128KB internal FLASH
Interface: 1.27X(12X2 +11) stamp edge; LoRa Antenna (IPEX) x 1
Size: 20.32 x 20.32 x 2 mm
Low Power Design: Deep Sleep 3.5uA
1 * CubeCell HTCC-AM02 LoRa Module 433MHz/868-915MHz
Based on the ASR650x series of chips, we have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, and can easily connect lithium batteries and solar panels…
This is the CubeCell series. Cube — Means modular design and easy assembly; Cell — Is the product positioning, as a unit of the IoT series, working like a cell.