Conductive Thread – 3m Three metres of conductive thread on a little card bobbin, an essential component of any wearables project!

Three metres of conductive thread on a little card bobbin, an essential component of any wearables project!

These are the same little spools you’ll find in our beautiful Bearables kits, and will come wound on either a bear or fox board. You’ll only receive one but there’s no difference between the two.

• approx. 0.15mm gauge
• 2ply (2x100x12µm)
• 36Ω per metre
• 3 metres included
• Steel stranded

Warning: this is steel stranded wire so can be sharp, be careful!