Cloudray T150 PLUS 150W 110V CO2 Laser Power Supply for CO2 Laser Engraving Cutting Machine T150 Plus Series
Application:
The T150 Laser Power Supply is used for cutting and engraving acrylic, fabric, double-colored sheets, rubber, etc., at 100W,120W, 130W, and 150W, respectively.
- Good compatibility: It can be applied to 100W,120W,130W, and 150W laser tubes manufactured by different factories.
- High output voltage and high output Current: when input AC220V and output current is up to 38mA, the Voltage can be up to 50KV.
- High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 50KV.
- This Power Supply has the “TEST” button, which can test the output laser manually.
- Easy Control: The start and stop of the laser can be easily controlled by the TTL level. There is also a protection switch to test the external water, ventilation, etc.
- Easy control of laser power: Both the 0-5V analog and PWM signals can control the laser power.
- The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of the laser tube, thereby enhancing the life of power supply.
- The power supply can take a feedback interface, which can be used in closed-loop control and testing the working current of the laser.
- The power supply adds a new function: timely scene judging which part is damaged, laser tube or laser power.
Input | Input Voltage | AC110V（to be specified when placing order） |
AC frequency | 47—440HZ | |
Cold Surge Current | ≤30A(AC110 Input) | |
Current Leakage | ≤0.4mA(AC110V Input) | |
Output | Max Output Voltage | DC 50KV |
Max Output Current | DC 38mA | |
Efficiency | ≥90﹪（full load） | |
Mean Time Between Failure (MTBF) | ≥10000H | |
Response Speed | ≤1ms（from the switch Signal is given to the output current up to 90% of the setting current） | |
Control Interface | TTL level switch control: high or low effective level can be chosen (details refer to the control terminal specification) | |
Pressure-proof | Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell. | |
Protection | can work in open-circuit condition for a short time（Require a good protective earthing and avoid arc between the positive and the machine shell） | |
Environmental | Operating Temperature：-10~40℃， Relative Humidity (RH)：≤90﹪ | |
Cooling Way | Force-Air Cooling (FAC) | |
Dimension | L×W×H=325*240*95(mm) | |
Technical Support:
1. All our items pass the ISO9001 and CE quality certification.
2. We are the manufacturer of the Co2 Laser Power Supply and have a strict quality control system. This system allows us to supply our clients with the best quality products at the lowest prices.
3. We have a professional technical support group for all items sold. If you need any assistance with your item’s problem, please do not hesitate to contact us. Our technical support will be there to assist you.
5. Manual testing: Make sure the power supply and laser tube wiring correct firstly, offline the control line and then press the red button TEST to test laser tube out light or not, this method can be simple judgment power supply is working correctly.
- High Efficiency, Fast Response, and Strong Adaptability.
- Simple Port Control, T TL level signals can control the laser start/stop.
- Laser Power Adjustment: input OV to 5V analog signal, can also input PWM signal.
- Open Circuit Protection Function: avoid the laser power supply damage due to the laser tube burst.
- The power supply T150 is guaranteed for ten months. The T150 Plus is guaranteed for sixteen months.
Main Features:
- Good compatibility. It can be suitable for laser tubes up to 150W.
- Good power stability and strong adaptability, can prolong the laser tube service life.
- Easy to control: the start and stop of the laser can be easily controlled by the TTL level.
- Output open circuit protection.
- TTL signal indication, water through signal indication, and laser output indication.
- Come with the BUTTON to test the output laser manually.
- Application: sculpture and cut acrylic, fabric, double color sheet, and rubber, etc.
Packing List
Supply*1PCS
There are no reviews yet.