Description
Heltec IOT Lora Wireless stick upgrade esp32 lora/wifi lora Development Board with 0.49inch oled display 433HMZ/868MHZ/915MHZ
WiFi LoRa 32 is a part of the “Heltec LoRa“ series, with the following features:
- CE Certificate;
- Microprocessor:Â ESP32Â (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276/SX1278;
- Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal 3D antenna, reserved IPEX (U.FL) interface for LoRa use;
- Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information;
- Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
- Support the Arduino development environment;
- We provide ESP32 + LoRaWAN protocol Arduino® library, this is a standard LoRaWAN protocol that can communicate with any LoRa gateway running the LoRaWAN protocol. In order to make this code running, a unique license is needed. it can be found on this page;
- With good RF circuit design and basic low-power design (sleep current ≤800uA), it is convenient for IoT application vendors to quickly verify solutions and deploy applications.
Processor
Adopt Lexin’s ESP32 chip
 32-bit dual-core, 240MHz frequency
 Integrated WiFi and Bluetooth
 The main processor is completely free to run the user application.
 An additional ULP coprocessor that monitors GPIOs, ADC channels, and controls most of the internal    peripherals.
LoRa
Using Semtech’s SX1276 chip
 Supports 433MHz, 470MHz, 868MHz, 915MHz quad-band optional
Can be used as both a LoRa node and a micro gateway
 Support LoRaWAN protocol
Node transmission distance: up to 6KM in open space
 Output power: up to +20dBm (±2dBm)
WiFi
 802.11 b/g/n/e/i
802 802.11 n (2.4GHz), speed up to 150Mbps
802 802.11 e: QoS mechanism to implement wireless multimedia technology
 WMM-PS, UAPSD
 MPDU and A-MSDU frame aggregation technology
Block reply, fragmentation and reorganization
 Beacon automatic monitoring / scanning
802 802.11 i security features: pre-authentication and TSN
 Support WPA / WPA2 / WPA2-Enterprise / WPS encryption
 Infrastructure BSS Station Mode / SoftAP Mode
 Wi-Fi Direct (P2P), P2P discovery, P2P GO mode and P2P power management
 Support for IPv6
Bluetooth
Bluetooth v4.2 full standard, including traditional Bluetooth (BR/EDR)
And Bluetooth Low Energy (BLE)
 Supports standard Class-1, Class-2 and Class-3 without external power amplifier
 Enhanced precision power control
 Output power up to +10 dBm
 NZIF receiver with BLE reception sensitivity of -128 dBm
Adaptive Frequency Hopping (AFH)
  Standard HCI based on SDIO / SPI / UART interface
High speed UART HCI up to 4 Mbps
 Support BT 4.2 controller and host protocol stack
 Service Discovery Protocol (SDP)
Universal Access Application (GAP)
Security Management Protocol (SMP)
 Low power Bluetooth
ATT ATT / GATT
 HID
 Supports all GATT-based Bluetooth low energy applications
 SPP-Like Low-Power Bluetooth Data Transmission Protocol
BLE BLE Beacon
 A2DP / AVRCP / SPP, HSP / HFP, RFCOMM
 CVSD and SBC audio codec algorithms
Bluetooth piconet (Piconet) and scatternet (Scatternet)
Human interaction
 0.49 inch OLED screen
 button (reset and program)
power supply
 Input power: USB, lithium battery
 Output power: +5V (only when USB is powered), +3.3V
Integrated lithium battery charging circuit
 External power supply controlled by IO port to facilitate development board to enter low power consumption
interface
UART UART, SPI, I2C, I2S, Mirco SD card
 12 – bits ADC, 8 – bits DAC
 29 general GPIO ports
storage
 FLASH: 64M-BitsMB
Power consumption
Sleep current: 800uA
Mechanical structure
 Size: 60mmX23mmX8mm
Reviews
There are no reviews yet.