Matek Systems

Matek Systems

Matek Systems

Showing all 8 results

  • Matek RGB LED X6/12V

    $4.99

    Matek RGB LED CIRCLE X6/12V comes with six RGB5050 LEDs & one code switch. Seven colors are selectable by means of code switches. This LED board gives an eye-catching effect to your multirotors or planes when illuminated.

  • MICRO BEC 5V/12V-ADJ

    $2.99

    Matek Micro BEC 5V/12V-Adj

    A Highly efficient synchronous rectified step-down switch mode converter. It offers a very compact solution to achieve 1.5A continuous output current over a wide input supply voltage (7 to 21V).

  • Matek MINI POWER HUB W/ BEC 5V & 12V

    $6.99

    The Mini POWER HUB has been engineered to provide the highest possible performance and reliability in a 36*36mm & 4 layers PCB.    

    The HUB distributes power from a battery pack to 4 ESCs, as well as providing two synchronised & regulated DC outputs for powering cameras,servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo, and the BEC input is TVS protected. The HUB also features convenient solder bridge of various Read More

  • Matek LED Power Hub 5in1 V3 Distribution Board BEC Alarm Finder For QAV210 QAV250

    $9.99

    The 5in1V3 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB.

    It is a 5in1 HUB with Power Distribution Board, BEC 5V/3A &12V/500mA, LED Light Controller, Lost Plane Finder & Low Voltage Alarm functions.

    It is specially made for the Multi-Rotors, mini FPV Quad. Built-in 5V BEC can be connected to receiver or flight controller with Aux pins directly.

  • Matek Lost Model Beeper Flight Controller 5V Loud Buzzer Built-in MCU for FPV Multicopters

    $4.99

    It can be used on traditional PWM receivers or FPV racing flight controller.

    The tiny buzzer is driven by on board MCU. It can output louder sound than 5V active buzzers.

  • Matek Micro Power Distribution Board PDB w/ BEC 5V/12V

    $6.99

    The Micro PDB has been engineered to provide the highest possible performance and reliability in a 32*22mm & 4 layers PCB. It distributes power from a battery pack to 4 ESCs, as well as providing dual synchronised & regulated DC outputs for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

  • HUBOSD eco H Type, w/STOSD8, Current Sensor & Dual BEC

    $18.99

    HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 46*36mm & 4 layers PCB. It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made for the mini FPV Quad. The BEC 12V is linear regulator, no LC Filter needed. Built-in STOSD8 can support Plug & Play, no complicated settings needed.

  • LiPo Cell Checker & Low Voltage Alarm, Matek BB6L

    $9.99

    Matek BB6L features 12bit MCU & a segment LCD screen that will show the total voltage & cells voltage of LiPo pack
    with 1mV resolution. It also features twin loud buzzers to notify you once the cells reach a user defined voltage.
    The lowest cell voltage can be recorded also.