Metal J-head Hot end for V5 1.75mm. Extruder. with Fan, Heater & Thermistor .02/.03/0.4/.05/.06/.08mm nozzle.

Description

Hot end Specs:
•For filament dameter: 1.75mm
•Nozzle size: Choose 0.2, 0.3, 0.4, 0.5, 0.6, 0.8mm

Metal enables working with Polycarbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supported by plastic extruders and hot end. Tested with PLA, ABS, polycarbonate, nylon and PVA.

NTC 3950 Thermistor parameters:
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Cooling Fan:
Size: 30x30x10mm
Voltage: 12V
Current: 0.08A ± 10%
Speed: 9500RPM ± 10%
Noise: 25dba ± 10%